Menu
GET A QUOTE
Menu
Menu

Pot Bridge Bearings

Pot Bearings for Bridges
Fixed and Sliding Pot Bridge Bearings
High Load Pot Bearings for Bridges
PTFE Pot Bridge Bearings
Pot Bridges Bearings
Pot Bearings for Bridges
Fixed and Sliding Pot Bridge Bearings
High Load Pot Bearings for Bridges
PTFE Pot Bridge Bearings
Pot Bridges Bearings

Pot Bridge Bearings – Heavy Load Bearing for Long Span Bridges

Pot bridge bearings are structural components designed to support large vertical loads while accommodating limited rotational and horizontal movements in bridges and heavy structures. Comprising a steel pot, an elastomeric disc, and a piston, these bearings transfer vertical loads through confined elastomeric compression while allowing rotational movement due to the deformation of the elastomeric disc. Pot bridge bearings are widely used in highway bridges, railway bridges, and other infrastructure where high vertical load capacity, durability, and minimal maintenance are required. Their robust design ensures stable performance under heavy loads and temperature variations, making them ideal for long-span bridges and structures requiring reliable load distribution and movement accommodation.
Send Inquiry
Live Chat

Aohong manufactures Pot Bearings designed to handle combined vertical loads, horizontal forces, and multi-directional rotations in bridge structures. Each unit consists of a steel pot, elastomeric pad, stainless steel sliding plate, and sealing ring, enabling the bearing to accommodate rotations up to 0.03 radians and displacements of ±50 mm to ±300 mm. These bearings are widely used in highway and railway bridges, long-span bridges, and cable-stayed bridges where high load capacity and minimal maintenance are required.

Structural Design and Components

Pot Bearings combine a rigid steel pot, elastomeric disc, PTFE sliding surface, and high-strength sealing system to support large vertical reactions exceeding 50,000 kN. The elastomer behaves like a confined fluid under pressure, allowing for controlled rotational movement, while PTFE-stainless steel interfaces enable smooth horizontal sliding. Optional features include guide rails for unidirectional movement and corrosion protection coatings for harsh environments.

Diagram of GPZ Pot Bridge Bearing
Diagram of GPZ Pot Bridge Bearing
Diagram of GPZ II Pot Bridge Bearing
Diagram of GPZ II Pot Bridge Bearing
Diagram of GPZ III Seismic Pot Bridge Bearing
Diagram of GPZ III Seismic Pot Bridge Bearing
Diagram of GPZ (KZ) Pot Bridge Bearing
Diagram of GPZ (KZ) Pot Bridge Bearing

Types of Pot Bearings

Fixed Pot Bearings

These bearings allow rotational movement but restrict horizontal displacements. They are commonly used where longitudinal and transverse movement must be controlled.

Guided Sliding Pot Bearings

Designed with edge or center guides, these bearings permit rotation and longitudinal sliding while limiting transverse movement. Standard displacement ranges are ±50 mm to ±250 mm.

Free Sliding Pot Bearings

Allowing both rotational and multi-directional horizontal movements, these bearings are suited for curved or inclined bridges with significant end reactions.

Fixed Pot Bearings
Fixed Pot Bearings
Guided Pot Bearings
Guided Pot Bearings
Free Sliding Pot Bearings
Free Sliding Pot Bearings

Features of Pot Bearings

  • Vertical load capacity up to 50,000 kN
  • Horizontal displacement accommodation from ±50 mm to ±300 mm
  • Minimal sliding friction coefficients of 0.03–0.05 with PTFE lubrication
  • Service temperature range: -40°C to +50°C
  • Rotational capacity: up to 0.03 radians
  • Corrosion protection via galvanization and epoxy coating
  • Easy installation, detachable components, and low maintenance requirements

Specifications

Vertical Load Capacity (kN)

1000, 3000, 5000, 10000, 20000, 30000, 40000, 50000

Standard Displacements

  • Longitudinal: ±50 mm, ±100 mm, ±150 mm, ±200 mm, ±300 mm
  • Transverse: ±5 mm to ±50 mm depending on design type

Material Options

  • Elastomer: Natural Rubber, Neoprene, or EPDM (60±5 Shore A hardness)
  • Steel: High-strength carbon steel with epoxy and galvanization finish
  • Sliding Interface: PTFE with polished stainless steel plate

Applications of Pot Bearings

  • Highway and railway bridges requiring high load capacity
  • Long-span and cable-stayed bridges subject to thermal expansion and seismic activity
  • Curved or inclined bridges with complex rotational requirements
  • Structures in cold regions down to -40°C
Pot Bearings for Long Span Bridges
Pot Bearings for Long Span Bridges
Pot Bearings for Highway Bridges
Pot Bearings for Highway Bridges
Pot Bearings for Railway Bridges
Pot Bearings for Railway Bridges

Why Choose Aohong Pot Bridge Bearings?

Aohong specializes in manufacturing high-quality Pot Bridge Bearings with advanced production technology, strict quality control, and customization options. Our bearings are designed for long-lasting performance, meeting both national and international standards.